Directed Audio 6550 Spécifications télécharger pdf (Page 14)

SPECIFICATIONS

RMS continuous power per channel, Channels 1-4 driven

into 4 ohms from 20 to 20,000 Hz, with less than 0.08%

total Harmonic Distortion @ 14.4 VDC. Channel 5-6

driven into 4 ohms from 20-250 Hz, with less than

0.08% THD @ 14.4 VDC.

RMS continuous power per channel, Channels 1-4 driven

into 2 ohms from 20 to 20,000 Hz, with less than 0.1%

Total Harmonic Distortion @ 14.4 VDC. Channel 5-6

driven into 2 ohms from 20-250 Hz, with less than 0.1%

THD @ 14.4 VDC.

RMS continuous power, 3-channel operation, channels 1-

4 bridged into 4 ohms from 20 to 20,000 Hz, with less

than 0.1% Total Harmonic Distortion @ 14.4 VDC.

Channel 5-6 bridged into 4 ohms from 20-250 Hz, with

less than 0.1% THD @ 14.4 VDC.

Dynamic power rating (IHF-202 Standard) at minimum

load

Directed model 6550 Ch 1-4 Ch 5-6

50 75

watts watts

75 125

watts watts

150

x2 250

watts watts

Signal-to-Noise Ratio Greater than 95 dB

Frequency Response 20-20,000 Hz ± 0.5 dB

Damping Factor @ 4 ohm Greater than 100

Crossovers (ch 1-6) Switchable high or low pass

12 dB/octave, continuously

variable 50 to 500 Hz

Bass Equalization (Ch 5-6) Switchable 8dB,

centered at 40Hz

Input Impedance 20K ohms

Input Sensitivity Variable from 150 mV to 8 volt

Output Impedance (ch 1-6) 2 to 8 ohms, stereo

4 to 8 ohms, bridged

Supply Voltage 10 to 16 VDC

Fusing and Power 60A

Minimum Cable Requirements (AWG) #8

(Per amp, trunk mounted)

700 watts

1 2 ... 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Directed Audio 6550 Spécifications Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Appareils audio à domicile Directed Audio 6550